Abstract
SU-G-TeP2-04: Comprehensive Machine Isocenter Evaluation with Separation of Gantry, Collimator, and Table Variables
Medical physics (Lancaster), Vol.43(6), pp.3663-3664
06/2016
DOI: 10.1118/1.4957039
Abstract
Purpose:
To develop and demonstrate application of a method that characterizes deviation of linac x-ray beams from the centroid of the volumetric radiation isocenter as a function of gantry, collimator, and table variables.
Methods:
A set of Winston-Lutz ball-bearing images was used to determine the gantry radiation isocenter as the midrange of deviation values resulting from gantry and collimator rotation. Also determined were displacement of table axis from gantry isocenter and recommended table axis adjustment. The method, previously reported, has been extended to include the effect of collimator walkout by obtaining measurements with 0 and 180 degree collimator rotation for each gantry angle. Twelve images were used to characterize the volumetric isocenter for the full range of available gantry, collimator, and table rotations.
Results:
Three Varian True Beam, two Elekta Infinity and four Versa HD linacs at five institutions were tested using identical methodology. Varian linacs exhibited substantially less deviation due to head sag than Elekta linacs (0.4 mm vs. 1.2 mm on average). One linac from each manufacturer had additional isocenter deviation of 0.3 to 0.4 mm due to jaw instability with gantry and collimator rotation. For all linacs, the achievable isocenter tolerance was dependent on adjustment of collimator position offset, transverse position steering, and alignment of the table axis with gantry isocenter, facilitated by these test results. The pattern and magnitude of table axis wobble vs. table angle was reproducible and unique to each machine.
Conclusion:
This new method provides a comprehensive set of isocenter deviation values including all variables. It effectively facilitates minimization of deviation between beam center and target (ball-bearing) position. This method was used to quantify the effect of jaw instability on isocenter deviation and to identify the offending jaw. The test is suitable for incorporation into a routine machine QA program.
Software development was performed by Radiological Imaging Technology, Inc.
Details
- Title: Subtitle
- SU-G-TeP2-04: Comprehensive Machine Isocenter Evaluation with Separation of Gantry, Collimator, and Table Variables
- Creators
- S Hancock - 6Tri-State Regional Cancer Center, Ashland, KYC Clements - 6Tri-State Regional Cancer Center, Ashland, KYD Hyer - 6Tri-State Regional Cancer Center, Ashland, KYE Nixon - 6Tri-State Regional Cancer Center, Ashland, KYE Martin - 6Tri-State Regional Cancer Center, Ashland, KYB Wang - University of LouisvilleS Jani - 6Tri-State Regional Cancer Center, Ashland, KYM Gossman - 6Tri-State Regional Cancer Center, Ashland, KY
- Resource Type
- Abstract
- Publication Details
- Medical physics (Lancaster), Vol.43(6), pp.3663-3664
- DOI
- 10.1118/1.4957039
- ISSN
- 0094-2405
- eISSN
- 2473-4209
- Number of pages
- 2
- Language
- English
- Date published
- 06/2016
- Academic Unit
- Roy J. Carver Department of Biomedical Engineering; Radiation Oncology; Stead Family Department of Pediatrics
- Record Identifier
- 9984047604902771
Metrics
30 Record Views