Logo image
Back
Airborne Nanoparticle Concentrations in the Manufacturing of Polytetrafluoroethylene (PTFE) Apparel
Journal article   Open access   Peer reviewed

Airborne Nanoparticle Concentrations in the Manufacturing of Polytetrafluoroethylene (PTFE) Apparel

Donna J.H Vosburgh, Dane A Boysen, Jacob J Oleson and Thomas M Peters
Journal of occupational and environmental hygiene, Vol.8(3), pp.139-146
01/22/2011
DOI: 10.1080/15459624.2011.554317
PMCID: PMC4773197
PMID: 21347955
url
https://www.ncbi.nlm.nih.gov/pmc/articles/4773197View
Open Access

Abstract

One form of waterproof, breathable apparel is manufactured from polytetrafluoroethylene (PTFE) membrane laminated fabric using a specific process to seal seams that have been sewn with traditional techniques. The sealing process involves applying waterproof tape to the seam by feeding the seam through two rollers while applying hot air (600°C). This study addressed the potential for exposure to particulate matter from this sealing process by characterizing airborne particles in a facility that produces more than 1000 lightweight PTFE rain jackets per day. Aerosol concentrations throughout the facility were mapped, breathing zone concentrations were measured, and hoods used to ventilate the seam sealing operation were evaluated. The geometric mean (GM) particle number concentrations were substantially greater in the sewing and sealing areas (67,000 and 188,000 particles cm −3 ) compared with that measured in the office area (12,100 particles cm −3 ). Respirable mass concentrations were negligible throughout the facility (GM = 0.002 mg m −3 in the sewing and sealing areas). The particles exiting the final discharge of the facility's ventilation system were dominated by nanoparticles (number median diameter = 25 nm; geometric standard deviation of 1.39). The breathing zone particle number concentrations of the workers who sealed the sewn seams were highly variable and significantly greater when sealing seams than when conducting other tasks (p < 0.0001). The sealing workers' breathing zone concentrations ranged from 147,000 particles cm −3 to 798,000 particles cm −3 , and their seam responsibility significantly influenced their breathing zone concentrations (p = 0.03). The finding that particle number concentrations were approximately equal outside the hood and inside the local exhaust duct indicated poor effectiveness of the canopy hoods used to ventilate sealing operations.
 nanoparticles aerosol mapping apparel workers occupational exposure polytetrafluoroethylene

Details

Metrics

41 Record Views
20 Times Cited - Web of Science
Logo image