Journal article
Crack-opening-area analyses for circumferential through-wall cracks in pipes—Part I: analytical models
The International journal of pressure vessels and piping, Vol.75(5), pp.357-373
1998
DOI: 10.1016/S0308-0161(97)00081-1
Abstract
Leak-before-break (LBB) analyses for circumferentially cracked pipes are currently being conducted in the nuclear industry to justify elimination of pipe whip restraints and jet impingement shields which are present because of the expected dynamic effects from pipe rupture. The application of the LBB methodology requires calculation of leak rates. The leak rates depend on the crack-opening area of the through-wall crack in the pipe. In addition to LBB analyses which assume a hypothetical flaw size, there is also interest in the integrity of actual leaking cracks corresponding to current leakage detection requirements in NRC Regulatory Guide 1.45, or for assessing temporary repair of Class 2 and 3 pipes that have leaks, as are being evaluated in ASME Section XI. The objectives of this study were to review, evaluate, and refine current predictive models for performing crack-opening-area analyses of circumferentially cracked pipes. A three-phase effort was undertaken to accomplish this goal. It is described here in a series of three papers generated from this study. In this first paper (Part I — Analytical models), a comprehensive review is performed to determine the current state-of-the-art in predicting crack-opening displacements for circumferentially cracked pipes under pure bending, pure tension, and combined bending and tension loads. Henceforth, new and improved analytical models and some preliminary results are presented for cases where current methods are inadequate or there are no available methods. Also, based on this review, a number of appropriate predictive models are identified for a systematic evaluation of their accuracy. The results of their evaluations will be presented and examined in the forthcoming companion papers (Part II — Model validations
[1] and Part III — Off-center cracks, restraint of bending, thickness transition, and weld residual stresses)
[2].
Details
- Title: Subtitle
- Crack-opening-area analyses for circumferential through-wall cracks in pipes—Part I: analytical models
- Creators
- S Rahman - Department of Mechanical Engineering, The University of Iowa, Iowa City, IA 52242, USAF.W Brust - Battelle Memorial Institute, Columbus, OH 43201-2693, USAN Ghadiali - Battelle Memorial Institute, Columbus, OH 43201-2693, USAG.M Wilkowski - Battelle Memorial Institute, Columbus, OH 43201-2693, USA
- Resource Type
- Journal article
- Publication Details
- The International journal of pressure vessels and piping, Vol.75(5), pp.357-373
- Publisher
- Elsevier Ltd
- DOI
- 10.1016/S0308-0161(97)00081-1
- ISSN
- 0308-0161
- eISSN
- 1879-3541
- Language
- English
- Date published
- 1998
- Academic Unit
- Mechanical Engineering
- Record Identifier
- 9984064238502771
Metrics
21 Record Views