Journal article
Dose-rate considerations for the INTRABEAM electronic brachytherapy system: Report from the American association of physicists in medicine task group no. 292
Medical physics (Lancaster), Vol.47(8), pp.e913-e919
08/2020
DOI: 10.1002/mp.14163
PMID: 32246456
Abstract
The purpose of this report is to provide detailed guidance on the dosimetry of the INTRABEAM® (Carl Zeiss Medical AG, Jena, Germany) electronic brachytherapy (eBT) system as it stands at the present time. This report has been developed by the members of American Association of Physicists in Medicine (AAPM) Task Group 292 and endorsed by the AAPM. Members of AAPM Task Group 292 on Electronic-Brachytherapy Dosimetry have reviewed pertinent publications and user manuals regarding the INTRABEAM system dosimetry and manufacturer-supplied dose calculation protocols. Formal written correspondence with Zeiss has also provided further clarification. Dose-rate calculations for the INTRABEAM system are highly dependent on choice of dosimetry protocol. Even with careful protocol selection, large uncertainties remain due to the incomplete characterization of the ionization chambers used for verification with respect to their energy dependence as well as manufacturing variations. There are two distinct sets of dose-rate data provided by Zeiss for the INTRABEAM system. One dataset (Calibration V4.0) is representative of the physical dose surrounding the source and the other dataset (TARGIT) has been adjusted to be consistent with a clinical trial named TARGIT (TARGeted Intraoperative RadioTherapy). The adjusted TARGIT doses are quite dissimilar to the physical doses, with differences ranging from 14% to 30% at the surface of a spherical applicator, depending on its diameter, and up to a factor of two at closer distances with the smaller needle applicators. In addition, ion chamber selection and associated manufacturing tolerances contribute to significant additional uncertainties. With these substantial differences in dose rates and their associated uncertainties, it is important for users to be aware of how each value is calculated and whether it is appropriate to be used for the intended treatment. If users intend to deliver doses that are the same as they were in 1998 at the onset of the TARGIT trial, then the TARGIT dose-rate tables should be used. The Calibration V4.0 dose rates may be more appropriate to use for applications other than TARGIT trial treatments, since they more closely represent the physical doses being delivered. Users should also be aware of the substantial uncertainties associated with the provided dose rates, which are due to beam hardening, chamber geometry, and selection of the point-of-measurement for a given ionization chamber. This report serves to describe the details and implications of the manufacturer-recommended dosimetry formalism for users of the INTRABEAM system.
Details
- Title: Subtitle
- Dose-rate considerations for the INTRABEAM electronic brachytherapy system: Report from the American association of physicists in medicine task group no. 292
- Creators
- Wesley S Culberson - University of Wisconsin–MadisonStephen D Davis - Baptist Hospital of MiamiGrace Gwe-Ya Kim - University of California, San DiegoJessica R Lowenstein - The University of Texas MD Anderson Cancer CenterZoubir Ouhib - Regional Cancer CenterMarija Popovic - McGill University Health CentreTimothy J Waldron - University of IowaHabib Safigholi - Carleton UniversitySamantha J Simiele - The University of Texas MD Anderson Cancer CenterMark J Rivard - Brown University
- Resource Type
- Journal article
- Publication Details
- Medical physics (Lancaster), Vol.47(8), pp.e913-e919
- DOI
- 10.1002/mp.14163
- PMID
- 32246456
- ISSN
- 0094-2405
- eISSN
- 2473-4209
- Language
- English
- Date published
- 08/2020
- Academic Unit
- Radiation Oncology
- Record Identifier
- 9984544938102771
Metrics
5 Record Views