Dust removal from a variety of surface materials with multiple electron beams

B. Farr; X. Wang; J. Goree; I Hahn; U. Israelsson; M. Horanyi

doi:10.1016/j.actaastro.2022.07.047

Back

Dust removal from a variety of surface materials with multiple electron beams

Journal article

Open access

Peer reviewed

Dust removal from a variety of surface materials with multiple electron beams

B. Farr, X. Wang, J. Goree, I Hahn, U. Israelsson and M. Horanyi

Acta astronautica, Vol.200, pp.42-47

11/01/2022

DOI: 10.1016/j.actaastro.2022.07.047

Files and links (1)

url

https://doi.org/10.1016/j.actaastro.2022.07.047View

Published (Version of record) Open Access

Abstract

Dust mitigation is one of the technical challenges to overcome for future lunar surface exploration. In our previous work, a new electron beam (e-beam) mitigation technology was introduced to remove dust particles from protected surfaces through an electrostatic mechanism developed based on a Patched Charge Model. This model shows that the emission and re-absorption of e-beam induced secondary electrons inside microcavities between dust particles can result in large charges on the particles and their subsequent ejections from the surface due to strong repulsive forces. It was shown that, due to random orientations of microcavities, varying the ebeam incident angle by rotating the sample surface can cause more microcavities to be exposed, thereby improving the cleaning effectiveness. In this paper, we present and test a new configuration to implement varying the beam angle. Here multiple e-beam sources are aimed at different angles simultaneously at a sample surface that is fixed in place. A large variety of surface material samples are tested to demonstrate the e-beam technology's application scenarios, including both insulating samples (spacesuit, glass, a photovoltaic (PV) panel, Kapton tape, thermal blanket and anodized aluminum) and a conducting sample (aluminum). It is shown that the multiple e-beam source configuration improves cleaning effectiveness by 10-30% in comparison to a single fixed beam and sample. Most of the insulating samples achieve 80-90% cleanliness after only the 2-3 min beam exposure, except for the PV panel that shows 50% cleanliness. The conducting aluminum sample shows relatively low cleanliness at 35-45% likely due to the attractive Coulomb mirror force between the charged dust and aluminum surface. Finally, various e-beam configurations are suggested depending on application scenarios.

Engineering

Technology

Engineering, Aerospace

Science & Technology

Details

Title: Subtitle: Dust removal from a variety of surface materials with multiple electron beams
Creators: B. Farr - Univ Colorado, Lab Atmospher & Space Phys, Boulder, CO 80303 USA
X. Wang - Laboratory for Atmospheric and Space Physics
J. Goree - University of Iowa
I Hahn - California Institute of Technology
U. Israelsson - Jet Propulsion Laboratory
M. Horanyi - University of Colorado Boulder
Resource Type: Journal article
Publication Details: Acta astronautica, Vol.200, pp.42-47
DOI: 10.1016/j.actaastro.2022.07.047
ISSN: 0094-5765
eISSN: 1879-2030
Publisher: Elsevier
Number of pages: 6
Grant note: NASA/SSERVI's Institute for Modeling Plasma, Atmospheres and Cosmic Dust (IMPACT) Game Changing Development Dust Mitigation project NASA/BPS Jet Propulsion Laboratory, California Institute of Technology
Language: English
Date published: 11/01/2022
Academic Unit: Physics and Astronomy; Mechanical Engineering
Record Identifier: 9984428664502771

Metrics

13 Record Views

18 Times Cited - Web of Science