Journal article
Investigating aperture-based approximations to model a focused dynamic collimation system for pencil beam scanning proton therapy
Biomedical physics & engineering express, Vol.8(2), p.25016
02/18/2022
DOI: 10.1088/2057-1976/ac525f
PMCID: PMC8917788
PMID: 35130520
Abstract
. The Dynamic Collimation System (DCS) is an energy layer-specific collimation device designed to reduce the lateral penumbra in pencil beam scanning proton therapy. The DCS consists of two pairs of nickel trimmers that rapidly and independently move and rotate to intercept the scanning proton beam and an integrated range shifter to treat targets less than 4 cm deep. This work examines the validity of a single aperture approximation to model the DCS, a commonly used approximation in commercial treatment planning systems, as well as higher-order aperture-based approximations for modeling DCS-collimated dose distributions.
. An experimentally validated TOPAS/Geant4-based Monte Carlo model of the DCS integrated with a beam model of the IBA pencil beam scanning dedicated nozzle was used to simulate DCS- and aperture-collimated 100 MeV beamlets and composite treatment plans. The DCS was represented by three different aperture approximations: a single aperture placed halfway between the upper and lower trimmer planes, two apertures located at the upper and lower trimmer planes, and four apertures, located at both the upstream and downstream faces of each pair of trimmers. Line profiles and three-dimensional regions of interest were used to evaluate the validity and limitations of the aperture approximations investigated.
. For pencil beams without a range shifter, minimal differences were observed between the DCS and single aperture approximation. For range shifted beamlets, the single aperture approximation yielded wider penumbra widths (up to 18%) in the X-direction and sharper widths (up to 9.4%) in the Y-direction. For the example treatment plan, the root-mean-square errors (RMSEs) in an overall three-dimensional region of interest were 1.7%, 1.3%, and 1.7% for the single aperture, two aperture, and four aperture models, respectively. If the region of interest only encompasses the lateral edges outside of the target, the resulting RMSEs were 1.7%, 1.1%, and 0.5% single aperture, two aperture, and four aperture models, respectively.
. Monte Carlo simulations of the DCS demonstrated that a single aperture approximation is sufficient for modeling pristine fields at the Bragg depth while range shifted fields require a higher-order aperture approximation. For the treatment plan considered, the double aperture model performed the best overall, however, the four-aperture model most accurately modeled the lateral field edges at the expense of increased dose differences proximal to and within the target.
Details
- Title: Subtitle
- Investigating aperture-based approximations to model a focused dynamic collimation system for pencil beam scanning proton therapy
- Creators
- Nicholas P Nelson - University of Wisconsin–MadisonWesley S Culberson - University of Wisconsin–MadisonDaniel E Hyer - Roy J. and Lucille A. Carver College of MedicineBlake R Smith - University of IowaRyan T Flynn - University of Iowa Hospitals and ClinicsPatrick M Hill - University of Wisconsin–Madison
- Resource Type
- Journal article
- Publication Details
- Biomedical physics & engineering express, Vol.8(2), p.25016
- DOI
- 10.1088/2057-1976/ac525f
- PMID
- 35130520
- PMCID
- PMC8917788
- NLM abbreviation
- Biomed Phys Eng Express
- ISSN
- 2057-1976
- eISSN
- 2057-1976
- Grant note
- R37 CA226518 / NCI NIH HHS
- Language
- English
- Date published
- 02/18/2022
- Academic Unit
- Roy J. Carver Department of Biomedical Engineering; Radiation Oncology
- Record Identifier
- 9984312971302771
Metrics
7 Record Views