Journal article
Lobar Sliding Reduces Parenchymal Distortion More in the Right Lung than the Left Lung
Journal of biomechanical engineering, Vol.147(7), 071005
07/01/2025
DOI: 10.1115/1.4068237
PMCID: PMC12502040
PMID: 40114614
Abstract
Interlobar sliding has long been suspected to help the lungs adapt to changes in thoracic cavity shape by reducing parenchymal distortion. Our previous controlled computational experiment tested the hypothesis that lung lobar sliding reduces parenchymal distortion during breathing, but only the left lung was studied. The goal of this study was to extend this analysis to the right lung which has three lobes and two fissures compared to the left lung?s two lobes and single fissure. Finite elastic contact mechanics models of the right lung were used to perform paired subject-specific simulations of lung deformation with and without lobar sliding from end inhale to end exhale at both tidal breathing volumes (n = 8) and breath hold volumes near total lung capacity and functional residual capacity (n = 6). Consistent with the hypothesis, we found that parenchymal distortion, quantified with the spatial mean of the anisotropic deformation index throughout each lung model, was lesser in the models with lobar sliding than their non-sliding counterparts (p = 0.008, 13% median difference for tidal breathing and p = 0.03, 19.6% median difference for breath holds). This effect was several times larger than was previously observed in the left lung (p = 0.008, 5.3% median difference for tidal breathing and p = 0.03, 3.2% median difference for breath holds), likely due to the greater number of sliding interfaces in the right lung than the left which better allow the right lung to adapt to the thoracic cavity.
Details
- Title: Subtitle
- Lobar Sliding Reduces Parenchymal Distortion More in the Right Lung than the Left Lung
- Creators
- Adam E Galloy - University of IowaJoseph M Reinhardt - University of IowaMadhavan L. Raghavan - University of Iowa
- Resource Type
- Journal article
- Publication Details
- Journal of biomechanical engineering, Vol.147(7), 071005
- DOI
- 10.1115/1.4068237
- PMID
- 40114614
- PMCID
- PMC12502040
- NLM abbreviation
- J Biomech Eng
- ISSN
- 0148-0731
- eISSN
- 1528-8951
- Publisher
- ASME
- Number of pages
- 15
- Grant note
- National Institutes of Health: T32 HL144461, R01 HL142625
National Institutes of Health (Training Grant No. T32 HL144461 and Research Grant No. R01 HL142625; Funder ID: 10.13039/100000002)
- Language
- English
- Electronic publication date
- 03/21/2025
- Date published
- 07/01/2025
- Academic Unit
- Roy J. Carver Department of Biomedical Engineering; Radiology; Engineering Administration
- Record Identifier
- 9984802108902771
Metrics
51 Record Views