Journal article
Modeling of grain refinement in aluminum and copper subjected to cutting
Computational materials science, Vol.50(10), pp.3016-3025
08/2011
DOI: 10.1016/j.commatsci.2011.05.020
Abstract
► A dislocation density-based numerical model is developed to simulate grain refinement by orthogonal cutting of Al 6061 T6 and OFHC Cu. ► The model predictions of steady-state chip formation and strain distribution are in good agreement with the measurements. ► The model predictions of the average grain size in the chip generally matched well with the measured values under varying cutting conditions.
Plane-strain orthogonal cutting has recently been exploited as a means to refine the microstructure of metallic materials from tens of micrometers or greater to a few hundred nanometers. While experimental work has produced a significant body of knowledge with regard to microstructure and properties of machined materials, only a handful of studies can be found in the literature to discuss the microstructural evolution mechanism and to predict grain refinement during cutting. In this paper, dislocation density-based material models are developed to model grain size refinement and grain misorientation during cutting of Al 6061 T6 and OFHC Cu under various cutting conditions. It is shown that the developed CEL finite element model embedded with the dislocation material models captures the essential features of the deformation field and grain refinement mechanism during cutting. The model predicts the grains in the machined chips are refined from an initial size of 50–100μm to about 100–200nm for Al 6061 T6 and OFHC Cu at a low cutting speed of about 0.02m/s with negative rake angle tools. It is shown that a small applied strain, high cutting speed or high cutting temperature will all contribute to a coarser elongated grain structure during cutting.
Details
- Title: Subtitle
- Modeling of grain refinement in aluminum and copper subjected to cutting
- Creators
- Hongtao DingNinggang ShenYung C Shin
- Resource Type
- Journal article
- Publication Details
- Computational materials science, Vol.50(10), pp.3016-3025
- Publisher
- Elsevier B.V
- DOI
- 10.1016/j.commatsci.2011.05.020
- ISSN
- 0927-0256
- eISSN
- 1879-0801
- Language
- English
- Date published
- 08/2011
- Academic Unit
- Mechanical Engineering
- Record Identifier
- 9984064598802771
Metrics
18 Record Views