Journal article
Nonwoven textile for use in a nanoparticle respiratory deposition sampler
Journal of occupational and environmental hygiene, Vol.14(5), pp.368-376
05/04/2017
DOI: 10.1080/15459624.2016.1263391
PMID: 27875101
Abstract
The nanoparticle respiratory deposition (NRD) sampler is a personal sampler that combines a cyclone, impactor, and a nylon mesh diffusion stage to measure a worker's exposure to nanoparticles. The concentration of titanium in the nylon mesh of the diffusion stage complicates the application of the NRD sampler for assessing exposures to titanium dioxide nanoparticles. This study evaluated commercially available nonwoven textiles for use as an alternative media in the diffusion stage of the NRD sampler. Three textiles were selected as containing little titanium from an initial screening of 11 textiles by field portable x-ray fluorescence (FPXRF). Further evaluation on these three textiles was conducted to determine the concentration of titanium and other metals by inductively coupled plasma-optical emission spectroscopy (ICP-OES), the number of layers required to achieve desired collection characteristics for use as the diffusion stage in the NRD sampler (i.e., the nanoparticulate matter, NPM, criterion), and the pressure drop associated with that number of layers.
Only three (two composed of cotton fibers, C1 and C2; and one of viscose bamboo and cotton fibers, BC) of 11 textiles screened had titanium concentrations below the limit of detection the XRF device (0.15 µg/cm
2
). Multiple metals, including small amounts of titanium, were found in each of the three nonwoven textiles using ICP-OES. The number of 25-mm-diameter layers required to achieve the collection efficiency by size required for the NRD sampler was three for C1 (R
2
= 0.95 with reference to the NPM criterion), two for C2 (R
2
= 0.79), and three for BC (R
2
= 0.87). All measured pressure drops were less than theoretical and even the greatest pressure drop of 65.4 Pa indicated that a typical personal sampling pump could accommodate any of the three nonwoven textiles in the NRD sampler. The titanium concentration, collection efficiency, and measured pressure drops show there is a potential for nonwoven textiles to be used as the diffusion stage of the NRD sampler.
Details
- Title: Subtitle
- Nonwoven textile for use in a nanoparticle respiratory deposition sampler
- Creators
- Donna J.H Vosburgh - Department of Occupational and Environmental Safety and Health, University of Wisconsin-WhitewaterJae Hong Park - School of Health Sciences, Purdue UniversityLevi W.D Mines - Department of Occupational and Environmental Health, The University of IowaImali A Mudunkotuwa - Department of Chemistry, The University of IowaT. Renée Anthony - Department of Occupational and Environmental Health, The University of IowaThomas M Peters - Department of Occupational and Environmental Health, The University of Iowa
- Resource Type
- Journal article
- Publication Details
- Journal of occupational and environmental hygiene, Vol.14(5), pp.368-376
- DOI
- 10.1080/15459624.2016.1263391
- PMID
- 27875101
- NLM abbreviation
- J Occup Environ Hyg
- ISSN
- 1545-9624
- eISSN
- 1545-9632
- Publisher
- Taylor & Francis
- Language
- English
- Date published
- 05/04/2017
- Academic Unit
- Roy J. Carver Department of Biomedical Engineering; Occupational and Environmental Health
- Record Identifier
- 9983997321002771
Metrics
23 Record Views