Numerical investigation of flow and turbulence structure through and around a circular array of rigid cylinders

Kyoungsik Chang; George Constantinescu

doi:10.1017/jfm.2015.321

This numerical study investigates flow and turbulence structure through and around a circular array of solid circular cylinders of diameter $d$ . The region containing the array of rigid cylinders resembles a porous circular cylinder of diameter $D$ . The porous cylinder Reynolds number defined with the steady incoming flow velocity is $\mathit{Re}_{D}=10\,000$ . Fully three-dimensional (3D) large eddy simulations (LES) are conducted to study the effects of the volume fraction of solids of the porous cylinder ( $0.023<\text{SVF}<0.2$ ) and $d/D$ on the temporal variation and mean values of the drag/lift forces acting on the solid cylinders and on the porous cylinder. The effects of the bleeding flow through the circular porous cylinder on the wake structure and the influence of the SVF and $d/D$ on the onset of flow three-dimensionality within or downstream of the porous cylinder and transition to turbulence are discussed. Results are compared with experimental data, predictions of theoretical models available in the literature and also with the canonical case of a solid cylinder ( $\text{SVF}=1,d/D=1$ ). Three-dimensional LES predict that large-scale wake billows are shed in the wake of the porous cylinder for $\text{SVF}>0.05$ , similar to the von Karman vortex street observed for solid cylinders. As the SVF decreases, the length of the separated shear layers (SSLs) of the porous cylinder and the distance from the back of the porous cylinder at which wake billows form increase. For sufficiently low volume fractions of solids (e.g. $\text{SVF}=0.05$ , 0.023), no wake billows are shed and the interactions among the wakes of the solid cylinders are weak. Even for $\text{SVF}=0.023$ , SSLs containing large-scale turbulent eddies form on the two sides of the porous cylinder, but their ends cannot interact to generate wake billows. In both regimes, the force acting on some of the solid cylinders within the array is highly unsteady. As opposed to results obtained based on 2D simulations, no intermediate regime in which the force acting on the solid cylinders is close to steady is present. Interestingly, an energetic low frequency corresponding to a Strouhal number defined with the diameter of the porous cylinder of approximately 0.2 is present within the porous cylinder and near-wake regions not only for cases where wake billows are generated but also for cases where no wake billows form. In the latter cases, this frequency is due to an instability acting on the SSLs which induces in-phase large-scale undulatory deformations of the two SSLs. A combined drag parameter for the porous cylinder ${\it\Gamma}_{D}=\overline{C}_{d}\,aD/(1-\text{SVF})$ is introduced, where $aD$ is the non-dimensional frontal area per unit volume of the porous cylinder. This parameter characterizes by how much the velocity of the bleeding flow at the back of the porous cylinder is reduced compared with the incoming flow velocity for a given total drag force acting on the porous cylinder. Results from simulations conducted with different values of the SVF, $d/D$ and mean time-averaged solid cylinder streamwise drag parameter, $\overline{C}_{d}$ , show that ${\it\Gamma}_{D}$ increases monotonically with increasing $aD$ . Several ways of defining the spatial extent of the wake region in a less ambiguous way are proposed.

Numerical investigation of flow and turbulence structure through and around a circular array of rigid cylinders

View Online

Abstract

Details

Metrics