Journal article
Stress distribution in fixed-partial prosthesis and peri-implant bone tissue with different framework materials and vertical misfit levels: a three-dimensional finite element analysis
Journal of oral science, Vol.55(3), pp.239-244
09/01/2013
DOI: 10.2334/josnusd.55.239
PMID: 24042591
Abstract
The purpose of this study was to evaluate the influence of superstructure material and vertical misfits on the stresses created in an implant-supported partial prosthesis. A three-dimensional (3-D) finite element model was prepared based on common clinical data. The posterior part of a severely resorbed jaw with two osseointegrated implants at the second premolar and second molar regions was modeled using specific modeling software (SolidWorks 2010). Finite element models were created by importing the solid model into mechanical simulation software (ANSYS Workbench 11). The models were divided into groups according to the prosthesis framework material (type IV gold alloy, silver-palladium alloy, commercially pure titanium, cobalt-chromium alloy, or zirconia) and vertical misfit level (10 m, 50 m, and 100 m) created at one implant-prosthesis interface. The gap of the vertical misfit was set to be closed and the stress values were measured in the framework, porcelain veneer, retention screw, and bone tissue. Stiffer materials led to higher stress concentration in the framework and increased stress values in the retention screw, while in the same circumstances, the porcelain veneer showed lower stress values, and there was no significant difference in stress in the peri-implant bone tissue. A considerable increase in stress concentration was observed in all the structures evaluated within the misfit amplification. The framework material influenced the stress concentration in the prosthetic structures and retention screw, but not that in bone tissue. All the structures were significantly influenced by the increase in the misfit levels.
Details
- Title: Subtitle
- Stress distribution in fixed-partial prosthesis and peri-implant bone tissue with different framework materials and vertical misfit levels: a three-dimensional finite element analysis
- Creators
- Atais Bacchi - Universidade Estadual de Campinas (UNICAMP)Rafael L. X. Consani - Universidade Estadual de Campinas (UNICAMP)Marcelo F. Mesquita - Universidade Estadual de Campinas (UNICAMP)Mateus B. F. dos Santos - Universidade Estadual de Campinas (UNICAMP)
- Resource Type
- Journal article
- Publication Details
- Journal of oral science, Vol.55(3), pp.239-244
- DOI
- 10.2334/josnusd.55.239
- PMID
- 24042591
- NLM abbreviation
- J Oral Sci
- ISSN
- 1343-4934
- eISSN
- 1880-4926
- Publisher
- Nihon Univ, School Dentistry
- Number of pages
- 6
- Language
- English
- Date published
- 09/01/2013
- Academic Unit
- Prosthodontics
- Record Identifier
- 9984945919302771
Metrics
3 Record Views