Journal article
The effect of repeated bonding on the shear bond strength of a composite resin orthodontic adhesive
The Angle orthodontist, Vol.70(6), pp.435-441
12/2000
DOI: 10.1043/0003-3219(2000)070<0435:TEORBO>2.0.CO;2
PMID: 11138647
Abstract
One of the problems clinicians face during treatment is bracket failure. This is usually the result either of the patient's accidentally applying inappropriate forces to the bracket or of a poor bonding technique. As a result, a significant number of teeth have to be rebonded in a busy orthodontic practice. The purpose of this study was to evaluate the effect of repeated bonding on the shear bond strength of orthodontic brackets. Fifteen freshly extracted human molars were collected and stored in a solution of 0.1% (wt/vol) thymol. The teeth were cleaned, polished, and etched with a 37% phosphoric acid gel. The brackets were bonded with the adhesive and light cured for 20 seconds. The teeth were sequentially bonded and debonded 3 times with the same composite orthodontic adhesive. At each time, all 15 teeth were debonded within a half hour after bonding to simulate the clinical condition at which a newly bonded bracket is attached to the arch wire. The results of the analysis of variance comparing the shear bond strength at the 3 debonding attempts indicated the presence of no significant differences among the 3 groups (P = .104). However, when the overall change in shear bond strength within each tooth was evaluated between debonding sequences 1 and 3, 10 teeth had a significant (P = .001) decrease (mean +/- SD, -4.6+/-2.5 MPa) in bond strength, whereas 5 teeth had a significant (P = .02) increase (mean +/- SD, 2.8+/-1.6 MPa). The present findings indicated that in general, the highest values for shear bond strength were obtained after the initial bonding. Rebonded teeth have significantly lower and inconsistent shear bond strength; ie, bond strength may further decrease or increase after the second debonding, and the changes in bond strength may be related to the changes in the morphologic characteristics of the etched enamel surface as a result of the presence of adhesive remnants.
Details
- Title: Subtitle
- The effect of repeated bonding on the shear bond strength of a composite resin orthodontic adhesive
- Creators
- S E Bishara - Department of Orthodontics, College of Dentistry, University of Iowa, Iowa City 52242-1001, USA. karla-starkovich@uiowa.eduL VonWaldJ F LaffoonJ J Warren
- Resource Type
- Journal article
- Publication Details
- The Angle orthodontist, Vol.70(6), pp.435-441
- Publisher
- United States
- DOI
- 10.1043/0003-3219(2000)070<0435:TEORBO>2.0.CO;2
- PMID
- 11138647
- ISSN
- 0003-3219
- eISSN
- 1945-7103
- Language
- English
- Date published
- 12/2000
- Academic Unit
- Preventive and Community Dentistry
- Record Identifier
- 9983917784802771
Metrics
23 Record Views