Journal article
Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult-to-machine alloys
Journal of materials processing technology, Vol.212(3), pp.601-613
2012
DOI: 10.1016/j.jmatprotec.2011.07.016
Abstract
► The material temperature increase due to laser-assist is analysed using a transient, 3D thermal model for various LAMM test configurations. ► A novel 2D finite element model is developed to simulate the continuous chip formation in LAMM with varying chip thickness with a strain gradient constitutive model. ► The steady-state workpiece and tool temperatures are determined using a heat transfer analysis based on the chip formation and thermal model analyses. ► An empirical tool wear model is implemented in the finite element analysis to predict tool wear in the LAMM side cutting process. ► The finite element model-predicted results are related to the surface integrity analysis and built-up edge formation in micro-milling.
This study is focused on numerical modeling analysis of laser-assisted micro-milling (LAMM) of difficult-to-machine alloys, such as Ti6Al4V, Inconel 718, and stainless steel AISI 422. Multiple LAMM tests are performed on these materials in side cutting of bulk and fin workpiece configurations with 100–300
μm diameter micro endmills. A 3D transient finite volume prismatic thermal model is used to quantitatively analyse the material temperature increase in the machined chamfer due to laser-assist during the LAMM process. Novel 2D finite element (FE) models are developed in ABAQUS to simulate the continuous chip formation with varying chip thickness with the strain gradient constitutive material models developed for the size effect in micro-milling. The steady-state workpiece and tool cutting temperatures after multiple milling cycles are analysed with a heat transfer model based on the chip formation analysis and the prismatic thermal model predictions. An empirical tool wear model is implemented in the finite element analysis to predict tool wear in the LAMM side cutting process. The FE model results are discussed in chip formation, flow stresses, temperatures and velocity fields to great details, which relate to the surface integrity analysis and built-up edge (BUE) formation in micro-milling.
Details
- Title: Subtitle
- Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult-to-machine alloys
- Creators
- Hongtao DingNinggang ShenYung C Shin
- Resource Type
- Journal article
- Publication Details
- Journal of materials processing technology, Vol.212(3), pp.601-613
- Publisher
- Elsevier B.V
- DOI
- 10.1016/j.jmatprotec.2011.07.016
- ISSN
- 0924-0136
- Language
- English
- Date published
- 2012
- Academic Unit
- Mechanical Engineering
- Record Identifier
- 9984064588002771
Metrics
17 Record Views