Journal article
Verification and validation study of URANS simulations for an axial waterjet propelled large high-speed ship
Journal of marine science and technology, Vol.16(4), pp.434-447
12/2011
DOI: 10.1007/s00773-011-0138-x
Abstract
The accurate prediction of waterjet propulsion using computational fluid dynamics (CFD) is of interest for performance analyses of existing waterjet designs as well as for improvement and design optimization of new waterjet propulsion systems for high-speed marine vehicles. The present work is performed for three main purposes: (1) to investigate the capability of a URANS flow solver, CFDSHIP-IOWA, for the accurate simulation of waterjet propelled ships, including waterjet–hull interactions; (2) to carry out detailed verification and validation (V&V) analysis; and (3) to identify optimization opportunities for intake duct shape design. A concentrated effort is applied to V&V work and performance analysis of waterjet propelled simulations which form the focus of this paper. The joint high speed sealift design (JHSS), which is a design concept for very large high-speed ships operating at transit speeds of at least 36 knots using four axial flow waterjets, is selected as the initial geometry for the current work and subsequent optimization study. For self-propelled simulations, the ship accelerates until the resistance equals the prescribed thrust and added tow force, and converges to the self propulsion point (SPP). Quantitative V&V studies are performed on both barehull and waterjet appended designs, with corresponding experimental fluid dynamics (EFD) data from 1/34 scale model testing. Uncertainty assessments are performed on iterative convergence and grid size. As a result, the total resistance coefficient for the barehull case and SPP for the waterjet propelled case are validated at the average uncertainty intervals of 7.0 and 1.1%D, respectively. Predictions of CFD computations capture the general trend of resistance over the speed range of 18–42 knots, and show reasonable agreement with EFD with average errors of 1.8 and 8.0%D for the barehull and waterjet cases, respectively. Furthermore, results show that URANS is able to accurately predict the major propulsion related features such as volume flow rate, inlet wake fraction, and net jet thrust with an accuracy of ~9%D. The flow feature details inside the duct and interference of the exit jets are qualitatively well-predicted as well. It is found that there are significant losses in inlet efficiency over the speed range; hence, one objective for subsequent optimization studies could be maximizing the inlet efficiency. Overall, the V&V work indicates that the present approach is an efficient tool for predicting the performance of waterjet propelled JHSS ships and paves the way for future optimization work. The main objective of the optimization will be reduction of powering requirements by increasing the inlet efficiency through modification of intake duct shape.
Details
- Title: Subtitle
- Verification and validation study of URANS simulations for an axial waterjet propelled large high-speed ship
- Creators
- Tomohiro Takai - IIHR-Hydroscience and Engineering, C. Maxwell Stanley Hydraulics Laboratory The University of Iowa Iowa IA 52242 USAManivannan Kandasamy - IIHR-Hydroscience and Engineering, C. Maxwell Stanley Hydraulics Laboratory The University of Iowa Iowa IA 52242 USAFrederick Stern - IIHR-Hydroscience and Engineering, C. Maxwell Stanley Hydraulics Laboratory The University of Iowa Iowa IA 52242 USA
- Resource Type
- Journal article
- Publication Details
- Journal of marine science and technology, Vol.16(4), pp.434-447
- Publisher
- Springer Japan; Japan
- DOI
- 10.1007/s00773-011-0138-x
- ISSN
- 0948-4280
- eISSN
- 1437-8213
- Language
- English
- Date published
- 12/2011
- Academic Unit
- Mechanical Engineering
- Record Identifier
- 9984064576802771
Metrics
18 Record Views